The engine load and engine speed sites can be set where ever needed giving you maximum
resolution at the points where the engine has the greatest changes in ignition requirements
to ensure smooth transition through these areas.
Values can be changed either by keyboard (online or offline operation) or with a
‘potbox’ (online only).
The potbox is a handheld device that allows you to adjust values by turning a dial.
They can be used on all our ECUs and so have 2 adjusters to allow for different functions
in our more complex ECUs, but on the 200 ECU all you need to adjust is ignition timing.
For those who are used to this type of control but do not want to invest in the hardware,
a ‘virtual potbox’ can be accessed on the PC.
Omex will on request email a suitable startup calibration, free of charge. More experienced
users however may already have a suitable calibration from earlier work but also
know for example that the engine they have is using a different sensor they have
in another calibration. The powerful ‘file compare’ function in MAP3000 allows you
to make comparisons between files and copy across the parts you want. This also works
between different ECU types so you can copy tables from a 600 calibration into a
Working with the ECU
We have just one software version to work with all of our ECUs past and present.
When you connect to an ECU the software automatically recognises which ECU it is,
allows you to send only suitable calibrations and brings up only the options and
tables associated with that ECU. Calibrations can be accessed either online (connected
to an ECU) or offline (not connected to the ECU), and all options, tables and maps
are adjustable in both of these modes. So you can make adjustments when connected
live to a running engine or can make adjustments from your experience when offline
then send the new calibration at a later date. When you are connected to an ECU,
the ECU is always the master; any changes you make on the PC immediately occur in
the ECU. If your computer battery runs out or the communications lead falls out etc,
all the work is still safely stored on the ECU
Changing values on the keyboard allows anything from entering a single number through
to full maths functions, and you can change the active site or any other sites of
any tables or maps whilst still running the engine. Multiple sites can be highlighted
and all changed together with simple increase and decrease commands or percentage
changes. Straight line calculations can be automatically made between sites or even
rows or columns to speed-up the mapping process. Colours in the maps and tables change
to allow you to instantly see which sites have been mapped, which have been calculated,
and which remain unchanged. If you are still unsure of exactly what changes you have
made, you can ‘view session changes’ and the map will show what changes have been
made in that session rather than the absolute values.
Seeing a trend in a graph is often a fast way of mapping by allowing you to make
sure the ignition is somewhere close before you even get to running the engine in
those conditions. It also allows you to easily pick out any sites you may have missed.
Our graphical views can also allow editing so you can make changes directly on this
view. The 3 dimensional maps also allow you to twist them round and zoom in on any
particular areas of interest so you can always get the perfect view of what is going
And the very best thing about the Omex software is it is free for anyone to use.
Nothing is locked away from you, no codes are required, and you have full access
to everything in the ECU that we have. Download from our support page, install on
your Windows PC, and start mapping now...
Map3000 & Data2000
“An ECU is only as good as the person who mapped it” is often heard by the tech support
team at Omex, so our MAP3000 software is designed to make the mapping as easy a job
as possible so you can get on and tune the engine rather than fight with software.
And our software is free access so anyone can learn to use Omex ECUs.
Everybody has their own preferred way of mapping so the MAP3000 software features
every way of mapping possible so you can work in the way that suits you. Do you like
tables of numbers or graphical views? All tables and maps can be viewed and edited
in either format. Do you like using the keyboard or using a potbox? We have both,
and even have a ‘virtual potbox’ if you like using potboxes but don’t have one of
Preset screens to cover different aspects of mapping such as sensor checking, idle
etc allow you to get everything you need for the task in just one mouse click, but
should you want anything else you can add to these screens or remove the parts you
don’t need and even save them as your own versions to use again.
There are hundreds of live parameters available to you. Everything the ECU reads,
calculates and outputs can be seen in MAP3000. However, sometimes things happen just
too fast for you to be able to see exactly what is going on when trying to read several
numbers all at once. To overcome this, we can record onto the PC’s hard drive any
of the live parameters and record many at the same time so you can analyse what was
happening afterwards at your own pace. The DATA2000 software allows you to view the
recorded parameters in bar charts, max and min values, scatter graphs and most usefully
line graphs with multiple overlays and zooming functions. And if you are struggling
to analyse the data yourself, the data file you have recorded can be emailed to Omex
so we can see what is happening in your ECU.